Får BSOD vid start av OverWatch samt i Windows
Tjena,
Jag har ett riktigt störande problem.
Får BSOD när jag startar Owewatch och lite random i Windows.
Körde Whocrashed, och kommer fram till detta.
Värt att tillägga är att RAM samt moderkort är utbytta mot nytt.
Någon som har en idé på vad som kan vara fel?
System Information (local)
--------------------------------------------------------------------------------
Computer name: DESKTOP-N7E5F45
Windows version: Windows 10 , 10.0, build: 17134
Windows dir: C:\WINDOWS
Hardware: ASUSTeK COMPUTER INC., PRIME B350M-A
CPU: AuthenticAMD AMD Ryzen 5 2600X Six-Core Processor AMD586, level: 23
12 logical processors, active mask: 4095
RAM: 17108660224 bytes total
Crash Dump Analysis
--------------------------------------------------------------------------------
Crash dumps are enabled on your computer.
Crash dump directories:
C:\Windows
C:\Windows\Minidump
On Wed 2018-07-04 20:57:41 your computer crashed or a problem was reported
crash dump file: C:\Windows\Minidump\070418-7687-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x198430)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF803464A2160, 0x1, 0xFF)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This might be a case of memory corruption. This may be because of a hardware issue such as faulty RAM, overheating (thermal issue) or because of a buggy driver.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Wed 2018-07-04 20:57:41 your computer crashed or a problem was reported
crash dump file: C:\Windows\MEMORY.DMP
This was probably caused by the following module: ntkrnlmp.exe (nt!IoGetStackLimits+0x7DD)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF803464A2160, 0x1, 0xFF)
Error: KMODE_EXCEPTION_NOT_HANDLED
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This might be a case of memory corruption. This may be because of a hardware issue such as faulty RAM, overheating (thermal issue) or because of a buggy driver.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
Crash dump directories:
C:\Windows
C:\Windows\Minidump
On Wed 2018-07-04 20:57:41 your computer crashed or a problem was reported
crash dump file: C:\Windows\Minidump\070418-7687-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x198430)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF803464A2160, 0x1, 0xFF)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This might be a case of memory corruption. This may be because of a hardware issue such as faulty RAM, overheating (thermal issue) or because of a buggy driver.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
The following dump files were found but could not be read. These files may be corrupt:
C:\Windows\MEMORY.DMP
//C
Jonsbo D31 Mesh
MSI B450M Mortar
AMD Ryzen 5800X3D
Corsair LPX 2x16Gb 3600MHz
AMD Radeon 7800XT Nitro +
