Corsair link och multi rail

Permalänk
Medlem

Corsair link och multi rail

@Corsair Johan
Hej, på mitt Rm1000i kan jag ju sätta multi rail eller singel rail, men det går inte att se dem olika railsen som på bilden nedan visar.
Vill gärna kunna se hur mycket det olika 12v linorna drar, vilket ser ut att funka på AX agget på bilden till vänster.
Jag har senaste link 4.8.2.1, men det funka inte i förra versionen heller.
Tacksam för svar.

Visa signatur

Corsair Obsidian 1000D* Corsair AX1600i* Asus Z790 Prime-A* Intel 13900K* 32GB G-Skill DDR5 7600Mhz/36* Asus RTX 4090* Corsair MP600 1TB* Samsung 980 Pro 1TB

Permalänk
Medlem

Jag antar att du menar rutorna på botten (där det står Enable OCP bla bla bla och sedan Ampere).
Om så är fallet så skulle jag gissa att RMi aggen helt enkelt inte har stöd för det.

"Corsair Link monitoring and control is also more limited on the HXi. We retain monitoring of power supply efficiency, temperature, and fan speed. We can also monitor voltage and amperage on the 12V, 5.5V, and 3V rails. The monitoring is more basic, though; while the AXi can monitor specific draws (24-pin motherboard cable, peripherals, individual PCIe rails), the HXi only gives a broad monitoring of 12V draw.

While we can’t configure OCP points on a per +12V rail basis like we can in the AXi, we can still toggle single and multiple +12V rail operation on the HXi. Like with the AXi series of power supplies, the HXi ships as a multiple +12V rail power supply by default."
http://www.corsair.com/en-us/blog/2015/january/hxi_vs_axi

Jag skulle gissa på att RMi antingen har samma features i Link som HXi eller mindre.

Visa signatur

Maximus X Hero - 8700k @5.1GHz - H115i - 32GB LPX@3466MHz - MSI 980Ti Gaming - EVGA SuperNova 750 G2 - Asus vg248qe - FD R5

Permalänk
Medlem
Skrivet av Elghinnarisa:

Jag antar att du menar rutorna på botten (där det står Enable OCP bla bla bla och sedan Ampere).
Om så är fallet så skulle jag gissa att RMi aggen helt enkelt inte har stöd för det.

"Corsair Link monitoring and control is also more limited on the HXi. We retain monitoring of power supply efficiency, temperature, and fan speed. We can also monitor voltage and amperage on the 12V, 5.5V, and 3V rails. The monitoring is more basic, though; while the AXi can monitor specific draws (24-pin motherboard cable, peripherals, individual PCIe rails), the HXi only gives a broad monitoring of 12V draw.

While we can’t configure OCP points on a per +12V rail basis like we can in the AXi, we can still toggle single and multiple +12V rail operation on the HXi. Like with the AXi series of power supplies, the HXi ships as a multiple +12V rail power supply by default."
http://www.corsair.com/en-us/blog/2015/january/hxi_vs_axi

Jag skulle gissa på att RMi antingen har samma features i Link som HXi eller mindre.

hmm trist, men fundera ändå på att byta mot ett AX1500i

Visa signatur

Corsair Obsidian 1000D* Corsair AX1600i* Asus Z790 Prime-A* Intel 13900K* 32GB G-Skill DDR5 7600Mhz/36* Asus RTX 4090* Corsair MP600 1TB* Samsung 980 Pro 1TB

Permalänk
Inaktivt företagskonto
Skrivet av Defender:

@Corsair Johan
Hej, på mitt Rm1000i kan jag ju sätta multi rail eller singel rail, men det går inte att se dem olika railsen som på bilden nedan visar.
Vill gärna kunna se hur mycket det olika 12v linorna drar, vilket ser ut att funka på AX agget på bilden till vänster.
Jag har senaste link 4.8.2.1, men det funka inte i förra versionen heller.
Tacksam för svar.

https://i.imgur.com/qCOxxtf.png

Hej Defender,

Det är för att på bilden så är det ett AXi nätagg, det är ett fullt digitalt nätaggregat så där kan man övervaka mer än på RMi serien.

Med vänliga hälsningar,
Corsair Johan