Windows 10 installation och samsung 970 evo m2
Hej!
Har lite problem men att installera windows 10 och söker lite hjälp.
Jag ska alltså göra en ny ren installation med usb.
Använder mig av microsofts egna verktyg för usb
Problem 1:
Windows cannot be installed to this disk. The selected disk is not of the GPT partition style.
Löste det genom de här stegen.
Follow these steps -
1. At installation screen press Shift+F10 or Fn + Shift + F10 keys at the same time.
2. You will get Command Prompt at installation screen.
3. Type "Diskpart" and hit Enter.
4. Type "list disk" hit Enter.
5. It will show you all the disk into your computer. Now type "Select disk 'disk_no.'" Like "select disk 0" Hit Enter.
6. Type "clean" and hit Enter, cleaning your hard disk will erase the whole disk so be careful if you have any data on the disk. Make a backup before cleaning the disk.
7. Type "convert gpt" and hit enter.
If GPT doesn't work for you the Type "convert mbr" OR "convert basic".
8. Exit the command prompt and proceed with the Windows installation.
Jag kunde då installera windows
Problem 2. fick det här efter jag löst första
windows 10 cannot be installed to this disk hardware may not support booting.
Försökt fixa med det här
edit: och lyckades starta windows installationen.
Compatibility Support Mode - set to [DISABLED]
Secure Boot
1- The M.2 drive has to be the only drive installed.
2 - Go into the BIOS, under the boot tab there is an option for CSM, make sure it is disabled.
3 - Click on secure boot option below and make sure it is set to other OS, not Windows UEFI.
4 - Click on key management and clear secure boot keys.
5 - Insert a USB memory stick with a UEFI bootable iso of Windows 10 on it, USB3 is quicker but USB2 works also. A Windows DVD won’t work unless you’ve created your own UEFI Bootable DVD.
6 - Press F10 to save, exit and reboot.
7 - Windows 10 will now start installing to your NVME drive as it has its own NVME driver built in.
8 - When the PC reboots hit F2 to go back into the BIOS, you will see under boot priority that Windows boot manager now lists your NVME drive.
9 - Click on secure boot again but now set it to WIndows UEFI mode. (see #3 above)
10 - Click on key management and install default secure boot keys
11 - Press F10 to save and exit and Windows will finish the install. Once you have Windows up and running, shutdown the PC and reconnect your other SATA drives.
edit: Problem 3
När jag gjorde intruktionerna ovan för att lösa problem 2 så fastnar jag på steg 8. Efter windows installationen syns inte ssd:en i bios? Trots att installationen gick bra? Någom som har en lösning?
Tacksam för alla tips