Marknadsskiftet mot mobila enheter och SSD-enheter som hålls tillbaka av den nuvarande specifikationen Serial ATA (SATA), har fått standardiseringsorganet SATA-IO att arbeta med industrin för att lösa tillkortakommanden i den nuvarande standarden SATA 3.1.

Först och främst spikas SATA Express, vilket kombinerar SATA och PCI Express 3.0 för att möjliggöra snabbare lagringslösningar. Medan dagens SATA begränsas till hastigheter på 0.6 GB/s (6 Gb/s) är SATA Express kapabel till att arbeta i upp till 2 GB/s via två PCI Express 3.0-kanaler.

I den nya revisionen ingår även den nya formfaktorn M.2 (tidigare NGFF), vilket möjliggör mindre SSD-enheter för pressade formfaktorer, som bärbara datorer och surfplattor. Sidonotis är att M.2 inte bara kommer användas för lagringsbaserade lösningar utan även för en myriad andra applikationer, som Wifi, WWAN och USB.

Den sista formfaktorn är MicroSSD, vilket är en standard för SSD-enheter på ett chip för inbyggda applikationer. Universal Storage Module (USM), som används för bland annat tv-apparater, mediaspelare och portabla enheter, utökas till USM Slim och möjliggör tillverkare att krymper tjockleken på den typen av enheter.

SATA 3.2 får även stöd för utökade energisparfunktionalitet. Däribland Devsleep, som tillåter ännu lägre energiförbrukning i viloläge för enheter som alltid är uppkopplade, exempelvis Ultrabook med stöd för Connected Standby. Avslutningsvis erbjuder Hybrid Information högre prestanda för hybridhårddiskar (SSHD).

Klicka här för att läsa hela pressmeddelandet

Serial ATA International Organization (SATA-IO), the industry consortium dedicated to sustaining the quality, integrity and dissemination of Serial ATA (SATA) technology, today announced the ratification of its revision 3.2 specification. The latest specification includes SATA Express, a new specification that enables the coexistence of SATA and PCIe storage devices, as well as enhancements in power management, new SATA form-factors, and optimizations for solid state hybrid drives (SSHDs).

"SATA technology continues to evolve to accommodate ever-changing storage industry requirements," said Mladen Luksic, SATA-IO President. "The updates featured in the revision 3.2 specification, such as SATA Express and enhancements for emerging solid state hybrid drives, are driven by current market trends. These new features demonstrate SATA-IO's ongoing commitment to providing low-cost, high-performance storage solutions."

Initially introduced in January 2013, the SATA Express specification enables a client storage ecosystem that allows SATA and PCIe solutions to coexist. A host implemented to this specification will connect to and function with either a SATA or PCIe storage device. PCIe technology enables increased interface speeds of up to 2 GB/s (2 lanes of PCIe 3.0), compared with today's SATA technology at 0.6 GB/s (6 Gb/s). The increased speed of PCIe provides a cost-effective solution for optimizing performance of Solid State Drives (SSDs) and emerging SSHDs. Storage devices not requiring the increased speed of PCIe, such as traditional hard disk drives (HDDs) and optical drives, will continue to be supported by SATA.

SATA revision 3.2 also incorporates the M.2 form factor, enabling small form-factor M.2 SATA SSDs suitable for thin devices such as tablets and notebooks. M.2 (formerly known as NGFF and defined by PCI-SIG) is a small form factor card that supports a variety of applications including WiFi, WWAN, USB, PCIe and SATA.

Additional key features and enhancements of revision 3.2 include:

  • microSSD - standard for embedded solid state drives (SSDs) that enables developers to produce single-chip SATA implementations for embedded storage applications.

  • Universal Storage Module (USM) - enables removable and expandable storage for consumer electronic devices. SATA revision 3.2 introduces USM Slim, which reduces module thickness, allowing smaller removable storage solutions.

  • DevSleep - the lowest yet level of power management where the drive is almost completely shut down, to meet the requirements of new always on, always connected mobile devices such as Ultrabooks.

  • Transitional Energy Reporting - provides the host with detailed information about the SATA storage device, facilitating better power management.

  • Hybrid Information - provides a mechanism in which the host can communicate data caching information to the drive, improving solid state hybrid drive (SSHD) performance.

  • Rebuild Assist - speeds the data reconstruction process in RAID configurations.

For more information on revision 3.2 and the complete SATA ecosystem, visit SATA-IO at booth #806 at the Flash Memory Summit on August 13-15, 2013, in Santa Clara, CA. SATA-IO will also be presenting "SATA v3.2: SATA Evolves" in the Standards session on August 13 from 4:35 to 5:45 p.m. at the event.

Visa mer